Professor Marios Salmas and his team are a referral centre for patients who have had knee replacement at other centres with unsatisfactory results, so that they still have pain and their knee does not function normally. After thorough investigation and a correct diagnosis, a possible revision of the knee replacement is planned in detail to correct the problem.
Total knee replacement is one of the most successful operations in orthopaedics. In the vast majority of cases, it allows patients to lead a more active life, free from chronic knee pain. However, over time a knee replacement can fail or wear out for a number of reasons. When this happens, the patient’s knee may become painful and swollen, with considerable stiffness and instability, which leads to daily activities being put on hold.
If a knee replacement fails, the orthopaedic surgeon will recommend a second operation to replace the prosthesis, known as revision. In this procedure, the surgeon removes some or all of the components of the original prosthesis and replaces them with new ones.
Although both operations have the same goal – to relieve pain and improve the patient’s life – revision is different from the first (primary) total knee replacement. It is a larger and more complex procedure that requires extensive planning as well as specialised implants, positioned with special instruments, to achieve a good result.
Description
During the first total knee replacement, the joint is replaced with an implant or prosthesis made of metal and special plastic inserts. Although most knee replacements are extremely successful, over time problems such as wear of the material and loosening of the prosthesis may appear, and a revision procedure may be needed to replace the worn components. Depending on the case, there are different types of operation. In some cases, only one part of the prosthesis is revised. At other times all three parts (femur, tibia and kneecap) have to be removed and replaced with special prostheses with additional parts (augments), or with bone grafts that fill the resulting bone defect. Bone damage can make it difficult for the orthopaedic surgeon to use standard knee prostheses, and in most cases specialised implants with longer stems are used to provide greater support.
When is revision total knee replacement recommended?
Wear and loosening of the prosthesis
For a total knee replacement to work properly and without pain, it needs a firm attachment to the bone. During the original operation, the implants are fixed to the bone with great precision, either with bone cement or through bone growing into specially designed porous prostheses. Over time, however, a prosthesis can loosen from the underlying bone and start to cause the patient pain.
The cause of loosening is not always clear, but activities that overload the knee, excess body weight and wear of the plastic (polyethylene) insert are factors that may contribute. In addition, patients who were younger at the time of their first operation are more likely to outlive the lifespan of the prosthetic materials, so they are quite likely to need surgery either because of loosening or because of normal wear of the materials.
In some cases, the microscopic particles produced by wear of the plastic insert build up around the joint and trigger a reaction from the patient’s immune system. This reaction also attacks the healthy bone around the prosthesis (osteolysis). In this way, osteolysis leads to bone loss and loosening of the prosthesis.
Infection
Infection is a possible complication of any surgical procedure, including total knee replacement. Infection may develop during the hospital stay or during recovery at home, or even years after surgery as a result of a dental procedure.
If an implant such as a knee prosthesis becomes infected, the knee becomes painful and stiff, and it may also loosen (septic loosening). Even if the implant does not loosen, the pain, swelling and possibly discharge from the knee may make revision surgery necessary.
Revision for septic reasons can be performed in two ways, depending on the case (type of bacteria, extent of infection, etc.)
- Surgical debridement. In some cases the area can be washed out and the polyethylene (plastic) insert replaced, while the metal implants may be left in place.
- Staged surgical treatment. In most cases the prosthesis must be removed completely and the revision performed in two separate operations. In the first operation the prosthesis is removed and a temporary cement block (spacer) impregnated with antibiotics is inserted, remaining in the joint for several weeks. During this period the patient also receives intravenous antibiotics. When the indications are right, the second operation is performed to remove the spacer and implant a new prosthesis. Replacing the prosthesis is associated with higher rates of curing the infection, but also with a longer hospital stay and more discomfort for the patient.
Instability
If the ligaments of the joint are damaged, the knee can become unstable. Because most implants are designed to work with the patient’s existing ligaments, any injury or change to these ligaments can prevent the knee from working properly. With instability, the patient feels that the “knee gives way” and it hurts. If the instability cannot be treated by non-surgical means (physiotherapy), it will need to be treated with revision of the total knee replacement.
Stiffness
Sometimes a total knee replacement may not achieve a good range of motion, and the patient may be unable to carry out their daily activities, mainly because of scar tissue formation. In this case, the orthopaedic surgeon may try to restore the joint’s range of motion with “manipulation under anaesthesia”.
During this procedure, under anaesthesia (so that the patient feels no pain), the doctor forcefully bends and straightens the knee in order to “break” the adhesions and scar tissue. If, despite this effort, the patient does not regain the knee’s range of motion, revision of the knee replacement may be needed.
Fractures
A periprosthetic fracture is a fracture (break) located around the components of a joint prosthesis, in this case the knee. These are injuries following a fall and usually require revision surgery.
To determine the extent of revision required, the orthopaedic surgeon will consider several factors, including bone quality, the type and location of the fracture and whether the prosthesis has loosened. When the fracture is comminuted or osteoporotic, all parts of the prosthesis may need to be replaced with larger, specialised components.
Preparing for surgery
Medical evaluation
A complete examination is usually scheduled several weeks before the revision surgery. Patients with chronic conditions, such as heart disease, should ideally be assessed by a cardiologist before the operation.
Tests
Imaging tests: The doctor will request certain imaging tests for more information. X-rays: These provide a good picture of dense structures, such as the bones and the components of the joint replacement, giving important information about how they relate to each other.
Other imaging tests: A bone scan and an MRI scan can help determine whether the prosthesis has loosened and investigate the possible causes.Laboratory tests: To check for possible infection, the doctor will request blood tests. In addition, they may aspirate the knee joint and send the joint fluid for analysis.
PLANNING FOR HOMEBecause the patient’s mobility is limited after surgery, help will be needed for several weeks. The doctor, a social worker or any other responsible professional should guide the patient. Depending on the circumstances, the patient may need to stay in hospital or a rehabilitation centre for some time.
Complications
As with any surgical procedure, there are risks associated with revision total knee replacement. The operation is longer and more complex than the first time, and therefore carries greater risks, which are explained to the patient before surgery.
Possible complications of revision total knee replacement include:
- Poor wound healing
- Reduced range of motion and stiffness of the knee
- Infection of the wound or the new prosthesis
- Bleeding
- Thrombosis
- Periprosthetic fracture during surgery
- Nerve or blood vessel injury
- Pulmonary embolism
- Cardiac complications
Surgery
In most cases the patient is admitted to hospital the day before surgery.
Anaesthesia
After admission, the patient is assessed by a member of the anaesthesia team. The most common types of anaesthesia are general (the patient is asleep), spinal or epidural, and regional anaesthesia with a nerve block. The anaesthetist will decide which type of anaesthesia is safest for the patient.
Surgery
Revision surgery is more complex and time-consuming than the first (primary) total knee replacement. In most cases it takes 2-3 hours.
First, the surgeon makes the incision along the old scar from the first operation. The incision may be longer to allow the components to be removed without obstruction. After the incision, the surgeon retracts the kneecap and exposes the joint between the femur and the tibia.
The orthopaedic surgeon examines the soft tissues for possible signs of infection or wear and decides whether to remove some or all of the components of the knee prosthesis.
The implants are then carefully removed so as to preserve as much healthy bone as possible. If cement was used in the first operation, it must be removed, a fairly time-consuming process that increases the length of the operation. Once the prosthesis has been removed, the orthopaedic surgeon prepares the bone surfaces for the revision prosthesis. In some cases there may be significant bone loss around the knee, so metal augment blocks are used to fill the defects.
Less often, a bone graft (autograft or allograft) may be used to fill the bone defects.
Finally, the surgeon implants the special components of the prosthesis, repairs the soft tissues and checks the movement of the knee. After a drain is placed, the wound is closed in layers.
Hospital stay
The patient stays in hospital for several days, as recovery after revision is slower than after the first total knee replacement.
PAIN MANAGEMENTAfter surgery the patient is given appropriate medication to manage pain. Barring unforeseen problems, walking begins in the first few days after surgery.
Physiotherapy
The patient will build up strength and range of motion in the joint with specific exercises, so as to return to daily activities as quickly as possible.
To restore full movement of the knee, the doctor may recommend a continuous passive motion (CPM) machine.
With the CPM machine the knee is moved through preset angles, which according to some colleagues leads to a faster recovery of range of motion.
Long-term results
The vast majority of patients who undergo revision total knee replacement have good long-term results, including pain relief and improved stability. However, full restoration of joint function is not always possible, and some patients will continue to have discomfort and stiffness after revision surgery.
The doctor will examine your case and recommend the right treatment.
Request an appointment210 7793103Patient cases
Patients with revision total knee replacement
Loosening of a total knee replacement – revision total knee replacement
Revision total knee replacement – post-traumatic knee arthritis with a tibial fracture and non-union
Robotic replacement of one knee and revision replacement of the other in one operation
Double revision replacement of both knees in one operation – 3 weeks after surgery
Appointment
Book an appointment for an assessment
The doctor will examine your case and explain your treatment options in detail.