Rehabilitation after total knee replacement
- The patient feels no pain after surgery
- The patient has no drain (tube) coming out of the knee
- 4 hours after surgery the patient walks with the help of a walking frame
- The knee has full extension and full flexion straight away
- The next day the patient walks unaided with full weight-bearing and goes up and down stairs
- 3 physiotherapy sessions take place at the clinic
- The patient is discharged the next day
- 5 physiotherapy sessions take place at home
- The stitches are removed after 2 weeks
- The patient returns to full activity within 1 month
Post-operative rehabilitation / recovery
For the post-operative rehabilitation of patients who have had a total knee replacement, our surgical team follows an advanced, fast-track protocol that gets patients back to their daily lives straight away, without needing help from another person.
Knee replacement with the Fast-Track rapid recovery protocol
In practice, a Fast-Track knee replacement involves:
- Modern pre-operative preparation
- A dedicated anaesthesia protocol
- A combination of robotic surgery, small incisions and a special surgical approach, in which the quadriceps is retracted rather than cut
The Fast-Track knee replacement method
- reduces the number of days the patient stays in hospital
- has a positive effect on the patient, helping them recover and get moving faster
- limits post-operative complications
- causes less morbidity
- reduces post-operative pain
- dramatically reduces the number of physiotherapy sessions needed after surgery
- the patient returns faster to normal daily activities
It has been shown that applying our protocols for pre-operative preparation, anaesthesia and surgical technique, together with a combination of robotic surgery, small incisions and a special surgical approach in which the quadriceps is retracted rather than cut, reduces the length of hospital stay after total knee replacement, has a positive effect on the patient by helping them recover and get moving faster, limits post-operative complications, causes less morbidity, reduces post-operative pain and dramatically reduces the number of physiotherapy sessions needed after total knee and hip replacement. The patient returns faster to normal daily activities.
Fast track & Enhanced Recovery After Surgery (ERAS) Protocols are rapid recovery protocols for patients after total hip and knee replacement.
The Fast-Track knee replacement protocol we use is characterised by:
- Shorter hospital stay
- Lower cost for the patient
- Atraumatic technique with minimal bleeding
- No need for blood transfusions
- Less post-operative pain
- Immediate weight-bearing from the day of surgery
- Fewer complications
The general principle is that the surgeon should use a technique that causes the least possible trauma to the tissues, so that the patient has less bleeding and pain.
We take every measure to reduce bleeding further with special medication, and we apply special solutions to the surgical area that treat pain effectively. Secure fixation of the components, combined with the technique, allows immediate weight-bearing on the leg from the very day of surgery, so the patient gets moving very quickly. This causes vasoconstriction, which also helps to limit bleeding. With proper pre-operative planning and correct application of the Fast-Track rapid recovery protocol after a total knee replacement, it is possible to shorten the hospital stay and, by extension, the cost.
Day-case surgery – discharge on the same day
No tubes, drains or urinary catheters are used; the patient can eat freely and is encouraged to return to their normal habits straight away, as if they had not undergone this major operation.
The Fast track & Enhanced Recovery After Surgery (ERAS) Protocol allows the patient to be safelydischargedfrom hospitalas early as the next day, or even on the same day when the right conditions are met (day case), since pain is under control and the body can cope effectively and quickly with the stress of surgery, reducing possible complications.
Advantages
- 30-minute operation instead of 2 hours
- Walking within 1 hour
- Same-day discharge
- No walking frame
- No catheters or drains
- 5-6 cm incision, with no muscle trauma
- Regional and local anaesthesia
- No opioids (no vomiting from painkillers)
- Complete elimination of pain
- Independent walking immediately after surgery
- Minimal risk of infection and inflammation thanks to the above advantages
Implants – total knee replacement prostheses
An orthopaedic surgeon recommends knee replacement surgery when the patient has severe pain, even at night, that does not ease with other treatments (medication, injections), and restricted movement due to osteoarthritis, rheumatoid arthritis or injury. Total knee replacement can relieve pain and help the patient live a fuller, more active life.
During surgery, the joint surfaces of the knee are replaced with an artificial implant or “prosthesis”. Although replacing the whole joint is the most common procedure, some patients benefit from partial replacement of the knee surfaces.
Implants are made of metal alloys (steel, titanium, cobalt), ceramic materials or strong plastics, and are fixed to the bone with acrylic cement. There are many different types of implant. The surgeon should recommend the type of implant that best meets the patient’s needs.
Normal function of the knee
The knee is the largest and strongest joint in the body. It consists of the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia), on which the femur rests, transferring loads to the foot. The kneecap sits in front of the femur and tibia, protecting the joint and distributing loads.
Under normal conditions, the knee allows the leg to bend and straighten, as well as a limited degree of rotation. The ligaments of the knee stabilise and support the joint, preventing extreme positions that could lead to injury.
Main types of implants – prostheses
For simplicity, the knee is thought of as a “hinge” joint because it can “open” and “close” like a door. In reality, the knee is a much more complex joint, because the bone surfaces roll and glide against each other as it bends and straightens.
The first types of implants followed the idea of a “hinge” joint and consisted of a single linked, articulated implant. Newer implant designs recognise the complexity of the joint and try to mimic the movement of a normal knee more closely. Some types of implant preserve the patient’s ligaments, while in others the ligaments are replaced by the prosthesis.
Today, a fairly large number of manufacturers produce more than 150 different types of prostheses available on the market.
The most recent design developments include gender-specific implants. Several studies show that the shape and proportions of a woman’s knee differ from those of a man’s. As a result, many manufacturers have developed special components for implants that better fit the knee of the average man or woman. However, there are no studies confirming that these implants last longer before wearing out or provide better function.
The right implant for the patient
The design and manufacturer of the implant used by the orthopaedic surgeon depend on many factors, including the condition, the patient’s needs (age, weight, activity level and health), the surgeon’s experience and familiarity with the implant, and the cost involved. All of these issues should be explained and discussed with the treating doctor.
Parts of the implant – prosthesis / technical features
In total knee replacement, up to three bone surfaces are replaced:
The lower end of the femur – femoral component: The metal femoral component covers the end of the femur (thigh bone). It includes a groove that mimics the trochlea of the natural joint and allows the kneecap to move smoothly as the knee bends and straightens.
The upper surface of the tibia – tibial component: The tibial component consists of a flat metal platform on which sits a separate insert made of very durable plastic, called polyethylene. In some designs the metal part is omitted and the polyethylene insert is attached directly to the bone. For extra stability, the metal part of the tibial component may also include a stem that is inserted deep into the centre of the tibia.
The joint surface of the kneecap – patellar component: Sometimes, depending on the degree of wear, the joint surface of the kneecap is replaced with a special dome-shaped plastic button (polyethylene) that reproduces the shape of the natural kneecap.
All the parts of the implants are designed so that the metal surfaces glide against polyethylene, which minimises friction and, by extension, wear over time.
Posterior-stabilised implants (Posterior Stabilized Designs)
In this type of prosthesis, the polyethylene of the tibial component has a raised surface with a specially shaped post that fits into a special groove in the femoral component (cam). The posterior cruciate ligament is removed so that the components can be fitted to the bone. In this way, the femoral and tibial components take over the function of the posterior cruciate ligament, preventing the femur from sliding too far forward when the knee bends.
Cruciate-retaining implants (Cruciate – Retaining Designs)
As the name suggests, with this type of implant the posterior cruciate ligament is preserved, without the need for the special design described in the previous paragraph. These prostheses may be suitable for patients whose posterior cruciate ligaments can continue to stabilise the knee joint.
Unicompartmental implants (Unicompartmental Implants)
In total knee replacement, prostheses are used that cover the ends of the femur and the tibia. If only one side of the knee joint is damaged, smaller implants can be used to resurface that side only (unicompartmental knee replacement).
Implants with a fixed or rotating polyethylene insert / (fixed- and mobile-bearing prostheses) (Fixed vs Mobile – bearing Prosthesis Implant)
Fixed-bearing prostheses: Most patients receive implants with a fixed polyethylene insert (fixed-bearing prostheses). In this type of implant, the polyethylene insert is firmly attached to the metal part of the tibial component. In some cases, excessive activity or excess weight can cause the polyethylene to wear faster. Worn materials can cause the prosthesis to loosen and become a source of significant pain for the patient. Loosening of the prosthesis is one of the main causes of failure of total knee replacement.
For patients who are younger, more active or overweight, the orthopaedic surgeon may recommend a prosthesis with a rotating polyethylene insert (mobile-bearing prosthesis). These implants are designed for potentially better performance with less wear.
Mobile-bearing prostheses: Mobile-bearing prostheses, like fixed-bearing ones, use three different components to mimic a natural knee joint. However, in mobile-bearing prostheses the polyethylene insert can rotate within small limits relative to the metal tibial component. This design gives patients a greater degree of rotation when moving their knee.
Compared with fixed-bearing prostheses, they need more support from the soft tissues, such as the knee ligaments. If the soft tissues are not strong enough, the risk of knee dislocation increases, which is a serious post-operative complication. In addition, mobile-bearing prostheses cost more. To date, there are no studies showing greater durability or improvement in pain or knee function with mobile-bearing prostheses.
Implant – prosthesis materials
The metal parts of the implant are made of titanium or cobalt-chromium alloys. The plastic parts are made of ultra-high molecular weight polyethylene (Ultra high molecular weight polyethylene). Together they weigh 400-500 grams, depending on the type and size of the prosthesis.
The materials used for prostheses must meet certain criteria
- They must be biocompatible, without causing any reaction or rejection of the material after implantation (rejection response).
- They must be able to faithfully reproduce the knee structures they are intended to replace. For example, they must be strong enough to withstand the normal loads on the knee, yet flexible enough to withstand stress. In addition, the components must be able to glide smoothly against each other.
- They must be able to keep their strength and shape for a long time.
Cemented and cementless implants – prostheses
A further difference between prostheses lies in how they are fixed to the bone.
Cemented prostheses use a special fast-setting resin – bone cement – (polymethyl methacrylate – PMMA), which holds the implants in place by filling the gap between bone and implant.
Cementless prostheses are made with a textured or porous special material (e.g. hydroxyapatite). Initially, the implants are wedged into the bone (press fit), and new bone then grows onto the special surface of the implants.
The term “hybrid” refers to total knee replacements that use a cementless femoral component and a cemented tibial and/or patellar component.
The orthopaedic surgeon should assess each case carefully before making decisions about the materials, technique and method of fixation, and should inform the patient fully.
Revision total knee replacement prostheses / (Revision Surgery)
The longevity and lifespan of an implant depend on several factors, including the patient’s activity level, weight and general health.
Just as natural wear contributes to the degeneration of the natural joint, wear of the prosthesis materials may eventually require a second operation, known as revision.
Revision total knee replacement often requires special prostheses with longer stems for the tibia and femur. In addition, metal augments (augments) are attached to make up for the bone loss that inevitably occurs.
In many cases revision prostheses use a greater degree of posterior stabilisation (posterior stabilized component) for more stability. In special cases of severe instability or bone loss, a linked, hinged prosthesis (“hinged” prosthesis) may be necessary.
Anaesthesia for total knee replacement
Before total knee replacement surgery, the treating doctor discusses anaesthesia with the patient in detail. Choosing the right anaesthesia is an important factor that can affect recovery, which is why it needs a careful conversation with the orthopaedic surgeon and the anaesthetist.
Several factors should be taken into account when choosing the anaesthesia, including:
- Previous experiences and preferences. It is important to know whether the patient has had anaesthesia before, whether they had any adverse reaction, and how other family members react to anaesthesia.
- The patient’s current state of health: whether they smoke, are overweight or are being treated for another health condition.
- Reactions to medicines: whether they have allergies or have ever had a side effect from medication, and also which medicines, vitamins, minerals or dietary supplements they are currently taking.
- Possible risks. The risks vary depending on the patient’s general health and on the type of anaesthesia chosen, and generally include breathing difficulties, allergic reactions and nerve damage. The surgeon and the anaesthetist will discuss the specific risks with the patient.
Types of anaesthesia
There are several different types of anaesthesia: local, regional and general.
Local anaesthesia
Local anaesthesia numbs only the area where the anaesthetic is injected or sprayed, or where an ointment is applied, and it lasts only for a specific, short period of time. Patients remain awake throughout. It is used mainly for minor procedures.
For larger operations, such as total knee or hip replacement, local anaesthesia is used to supplement the main anaesthesia.
Regional anaesthesia
This type of anaesthesia involves blocking the nerves, which numbs the area supplied by that nerve, without affecting breathing or brain function. Because the patient remains awake, relaxing or sedative medicines are given so that they can sleep. The 3 main types used most often are spinal anaesthesia, epidural anaesthesia and peripheral nerve blocks.
- In spinal anaesthesia, the medicine is injected into the cerebrospinal fluid that surrounds the spinal cord and the nerves of the lower part of the body, giving rapid pain relief that wears off after several hours.
- In epidural anaesthesia, a catheter is inserted into the patient’s lower back so that anaesthetic can be delivered into the epidural space for a set period of time. Epidural and spinal anaesthesia are given in a similar way and at a similar anatomical site.
- Peripheral nerve blocks. A peripheral nerve block delivers anaesthetic directly around the main nerves of the patient’s thigh, such as the femoral or sciatic nerve. These blocks numb only the affected leg, not the other one. Depending on the case, the block may be given as an injection to numb the operated area for the surgery only, or a catheter may be left in place to deliver anaesthetic continuously around the nerve for several days after surgery.
The advantages of regional anaesthesia are a lower risk of bleeding, fewer cases of nausea and dizziness, and a lower chance of medical complications such as cardiac arrest or ischaemic or haemorrhagic stroke (which, although very rare, can occur with general anaesthesia). Side effects of regional anaesthesia may include headache, urinary symptoms (difficulty passing urine after surgery), allergic reactions and, more rarely, nerve damage.
General anaesthesia
General anaesthesia is used mainly for major operations, such as total joint replacements. It may be chosen based on the patient’s or the surgeon’s preference, or when local anaesthesia cannot be used. Unlike the other types, general anaesthesia affects the patient’s whole body, brain and nervous system, and makes them temporarily unconscious.
- Administration. With general anaesthesia, the anaesthetist gives the anaesthetic by injection or inhalation. A breathing tube (intubation) will also be placed to help the patient breathe.
- Risks. As with any type of anaesthesia, there are risks if the patient has heart disease, chronic breathing problems or other serious conditions.
General anaesthesia affects heart and lung function, and there is a small chance of serious complications such as a heart attack or stroke. The breathing tube can cause a sore throat or tenderness due to irritation of the vocal cords. Nausea, headache and dizziness are also common.
Pain relief after surgery
The aim of pain control after surgery is to minimise discomfort and relieve pain, so that the patient can take part more freely and actively in the post-operative physiotherapy programme. Pain relief can be given as oral medication, or combined with intravenous treatment.
A modern method of pain relief is patient-controlled analgesia. With this method the patient controls the intravenous flow of the medicine, within safe limits set by the doctor.
When regional anaesthesia is used, the special catheter can be left in place and the infusion of medicine continued during the first days after surgery.
Finally, using painkillers correctly after the operation is extremely important for the patient’s recovery. It encourages them and helps with their full rehabilitation after surgery.
Activities after total knee replacement
After a total knee replacement, patients expect to return to the lifestyle they had before surgery, but without the pain. This is true, but it takes a reasonable amount of time. For this reason, the patient’s active participation in the post-operative rehabilitation programme helps them reach this goal sooner and achieve a better overall result.
By the end of the programme, the patient returns to almost all daily activities, while avoiding movements and exercises that put excessive load on the operated knee, for example sports such as running (jogging).
Discharge from hospital
The hospital stay after total knee replacement lasts 1–4 days and depends on how quickly the patient recovers.
Before being discharged from hospital, the patient should have achieved several goals, such as:
- Getting out of bed on their own
- Pain reduced to acceptable levels
- Being able to look after themselves when eating and using the bathroom
- Being able to do the appropriate rehabilitation exercises at home
- Walking with a walking stick or walking frame on level, even ground, and possibly going up and down 2–3 steps
- Understanding all the instructions given to ensure a quick and proper recovery
If the patient cannot meet these goals, it may be better to stay a few more days in hospital or in a rehabilitation centre. Although the chance of complications after total knee replacement is small, if they do occur they may lengthen the time needed for full recovery. The treating doctor will inform the patient about these complications and explain the possible symptoms, so that they can stay alert.
Symptoms and warning signs that may indicate infection
- Fever > 38°C
- Chills
- Redness, tenderness or swelling of the wound
- Discharge (pus) from the wound
- Increasing pain both during activity and at rest
Symptoms and warning signs of possible thrombosis
- Pain in the calf or leg away from the skin incision
- Tenderness above or below the knee
- Increasing swelling in the calf, foot or ankle
Very rarely, a blood clot can travel through the bloodstream to the lungs and cause a pulmonary embolism, a potentially life-threatening condition. Signs that a blood clot has travelled to the lungs are:
- Difficulty breathing
- Sudden onset of chest pain
- Localised chest pain with coughing
If any of these symptoms appear, the treating doctor should be contacted immediately.
Recovery at home
In the first days or weeks after discharge, the patient may need help from another person. Before surgery it is useful for the patient to let family and friends know, so that they can help during the post-operative period.
Preparing the home
Some tips may help patients with the changes needed for the first days after surgery:
- Remove any physical obstacle that could get in the patient’s way and make them trip or stumble.
- Tidy away cables around the house so that they do not get in the way and cause an accident.
- Move furniture so that the patient can move freely with a walking stick or a walking frame.
Wound care
During recovery at home, the patient should look after the wound to avoid infection:
- The wound area must be kept clean and dry. Dressings should be changed carefully and according to the treating doctor’s instructions.
- The treating doctor will decide whether and when the wound can get wet.
If the wound changes in appearance and starts to become red, the surgeon must be informed.
Swelling
Mild to moderate swelling is normal for the first 3–6 months after surgery. To reduce swelling, the patient should raise the leg and apply ice. Bandaging the leg can also reduce swelling, but it should be applied by experienced staff. In the case of sudden, obvious swelling, the treating doctor should be informed immediately, as this may be a symptom of thrombosis.
Medication
Medication is taken according to the treating doctor’s instructions. Medicines at home may include opioid or non-opioid painkillers, oral or injectable anticoagulants, and tablets for dizziness and nausea.
Preventing any infection that could affect the joint is extremely important. The patient should take preventive antibiotics whenever there may be a risk of infection, for example when visiting the dentist, who should also be aware of the operations the patient has had.
Diet
From the very first days, the patient can follow a normal diet. The treating doctor may recommend vitamin or iron supplements. They may also advise avoiding vitamin K, especially in combination with anticoagulant treatment. The patient’s weight should also be kept at a healthy level, so that the joint is not loaded with extra kilos.
Returning to daily activities
Once back home, the patient should stay active. The key to recovery is adding new exercises every day. Although there will be good days and less good days, gradual improvement will be seen. In general, the following guidelines apply:
DRIVING: In most cases, driving can start once the patient has stopped taking opioid painkillers and their reflexes have returned to normal. These decisions are made together with the treating doctor.
SLEEPING: The patient can sleep freely on either side, on their front or on their back.
RETURNING TO WORK: Depending on the type of work and on how quickly the patient recovers, it may take several weeks before returning to work. Here too, decisions are made together with the treating doctor.
Exercise and sport
It is a good idea for the patient to continue the physiotherapist’s exercises for two months after surgery. In some cases the doctor may suggest using an exercise bike at home to maintain muscle tone and knee flexibility. After two months, the patient can start a range of activities, such as:
- Walking
- Swimming. This is an excellent low-impact exercise for the knee after knee replacement.
Air travel is possible with the treating doctor’s approval and depending on the stage of recovery, because changes in air pressure can cause swelling in the operated leg.
Use of splints and braces
Splints and braces support and protect bones and soft tissues after an injury. When a bone fractures (breaks), the orthopaedic surgeon tries to realign the broken pieces – if the fracture is displaced – and to hold them in the correct anatomical position so that they “knit together”, i.e. the fracture heals. Splints and braces hold the bones in place while they heal and, because they keep the limb still, they also reduce pain, swelling and muscle spasm.
In many cases a splint is applied after surgery.
Simple splints provide less support than full (circular) casts. However, simple splints are less rigid and allow the limb to swell without causing problems for the patient (swollen fingers or toes, numbness or even weakness of the limb). In every case the orthopaedic surgeon will decide which type of support is best for the patient.
Types of splints and braces
A full cast is made individually for each case (custom-made). It must fit the shape of the patient’s limb in order to give the best support. It is made from plaster (plaster of Paris) or a special resin (fiberglass) that is moulded to shape.
Splints can be custom-made – especially when a precise fit to the limb is needed – while at other times ready-made, off-the-shelf splints can be used. These come in various sizes and shapes and use Velcro straps so that they are easier to put on and take off.
Materials
The hard supporting part of the splint is made of fiberglass resin or plaster.
Fiberglass is lighter and stronger than plaster. X-rays also pass through resin more easily when an X-ray check is needed. On the other hand, plaster is cheaper and sometimes easier to mould for a particular use.
Application
With both resin and plaster, padding is used as a protective layer for the skin. Both materials come in rolls of various sizes that are wetted before use (dipped in water) and applied over the padding on the injured area.
The splint or cast must fit the arm or leg in order to give the best possible support to the broken bone.
In many cases a splint is applied first so that the injured area is not compressed as it swells, and after a few days it is replaced by a full cast. Also, as the initial swelling goes down, it is sometimes necessary to change the cast and apply a new one that fits better.
Getting used to the splint or cast
Swelling from the injury can cause pressure inside the splint or cast, and therefore on the patient’s limb, for the first 48 to 72 hours. With a removable or functional brace, the doctor shows the patient how to adjust it properly.
It is very important for the patient to control swelling, as this reduces pain and helps the fracture heal. To reduce the chance of swelling:
- Raise the limb. It is very important for the patient to keep the injured limb (arm or leg) raised above the level of the heart for the first 48 to 72 hours, using pillows or another support. For a leg, this means lying down. In this way the patient takes advantage of hydrostatic pressure, allowing fluid (outside the blood vessels and cells) to drain from the limb back towards the body.
- Exercise. Gentle, frequent movement of the fingers or toes prevents stiffness after injury caused by immobilisation.
- Ice. Applying ice over the splint or cast helps relieve discomfort and limits swelling.
Warning signs
Swelling can create a lot of pressure under the splint and may lead to serious problems. If the patient experiences any of the following symptoms, they should contact the treating doctor immediately for advice.
- Increasing pain and a feeling that the splint is too tight because of swelling.
- Numbness and tingling of the limb due to excessive pressure on the nerves.
- Burning and stinging due to excessive pressure of the material on the skin.
- Excessive swelling beyond the splint, which may mean that normal blood circulation is being obstructed.
- Inability to move the fingers or toes, which requires immediate assessment by the doctor.
Caring for the splint or cast
The doctor will explain to the patient all the restrictions that come with using a splint or cast, and should also give all the instructions needed to avoid complications while the fracture heals.
The following information gives general guidance and in no way replaces the doctor’s instructions for each individual patient.
After the first few days, once the patient has adjusted to the new situation, they should keep the splint or cast in good condition. This will help recovery:
- Keep the splint dry. Moisture weakens plaster and can also irritate the skin. Two layers of plastic or waterproof material can keep the splint or cast dry while showering or bathing.
- Walking splints (splints that you are allowed to put weight on). The patient should not put weight on the splint until it is completely dry and hard. This takes about an hour for resin (fiberglass) and two to three days for plaster.
- Keep the splint clean. Sand, dust and dirt in general should be kept away from the inside of the splint.
- Padding. The patient should not pull out the inner padding.
- Itching. Pushing objects such as coat hangers or keys inside the splint does not help. Likewise, deodorants and powders are best avoided. If the itching persists, the doctor should be informed.
- The patient should not cut or trim any protruding edges of the splint or cast before asking the doctor.
- Check the skin around the splint regularly. If there is redness, the patient should contact the doctor.
- Check the splint itself regularly for soft spots or cracks. If there are any, the doctor should be informed.
In conclusion, the patient should use common sense. Despite the difficulties it causes in daily activities, the splint protects and promotes the healing of soft tissues and fractures. The splint is removed as early as possible and, if the case allows, a functional brace is used, which patients tolerate more easily.
Removing the splint or cast
The patient should never remove the splint or cast themselves. They could injure themselves and prevent the fracture from healing (knitting together).
The doctor uses a special oscillating saw to remove the cast. The saw vibrates but does not rotate. If the blade touches the padding it does not go any further, so the skin is protected. These saws can be noisy and can get warm, but they are completely harmless to the patient.
Nevertheless, if the patient feels pain during removal, they should tell the doctor.
Recovery and rehabilitation
Bones need several weeks to months to “knit together” after a fracture. Pain usually eases early, well before the fracture has healed. The splint or cast must be used until the fracture has fully healed and the patient can support their own weight.
While the splint is being used, the patient loses muscle strength in that limb. For this reason it is important to follow a strengthening programme after the splint is removed, to help restore muscle strength and range of motion of the limb.
The doctor will examine your case and recommend the right treatment.
Request an appointment210 7793103Appointment
Book an appointment for an assessment
The doctor will examine your case and explain your treatment options in detail.